Daewoo company well known in kingdom for their reliable products like washers today every Daewoo washers are update with new technology and this technology work with sensors electronic boards and many other electric things, but every appliance needs a service after their long-life use.
Al-Zayyan centre provide a service for Daewoo washing machines in Makkah .
We have genuine spare parts for many kinds of Daewoo washing machines.
Technician of Daewoo washers repair in Makkah
our technicians well experienced for the maintenance of Daewoo washing machines in Makkah we have skilled technicians for the top loaded Daewoo washers and the front-loaded Daewoo washers in Makkah .
Repairing Daewoo washers in Makkah
Proper care of your washer can extend its life.
Daewoo washers error code and solution
- 1E
- WATER INLET ERROR
This error occurs when the water level sensor frequency does not change by more than 0.08KHz for 10 minutes after the start of water filling, and when the water is not filled up for 60 minutes. Procedure to handle this error: Open and close the door, check the water valve and water pressure, and press Start/Pause button, then the error is cleared, and water will be filled again
- UE
- UNBALANCE ERROR
This error occurs when the unbalance switch is activated a third time after performing the unbalance operation (water fill + wash) twice during the spin stage. Procedure to handle this error: Open the door, arrange the contents evenly, and close the door. Then the error will be cleared, and spinning will be performed again
- LE
- DOOR OPEN ERROR
This error indicates that the door opens during the operation of the washing machine. Procedure to handle this error. Close the door then the lock is engaged, and the course continues
- E2
- OVERFLOW ERROR
Overflow error
1 Conditions of Occurrence. In case water level in water tank is above overflow level due to continuous operation of water supply valve
2 Water supply motor is kept on until water level falls below reset.
3 All LEDs are turned off and ‘E2’ blinks in 18:88 display.
4 Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
5 Error display is cleared when turning off/on power
- E4
- LEAKGE ERROR
Water leakage during washing
1 Conditions of Occurrence. In case water level falls below re-supply even after 15 times of re-supply prior to finishing of water heating
2 All LEDs are turned off and ‘E4’ blinks in 18:88 display.
3 Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
4Error display is cleared when turning off/on power.
TROUBLESHOOTING
Most problems are easily solved if you understand the cause.
If the error mode such as IE, OE, UE were displayed on the control part, in order to solve these problems, first turn off the power of the washing machine and then turn on the power by pressing the Power button.
If PFE error mode was displayed on the control part, in order to solve this problem, first turn off the power of the washing machine, the second turn on the power pressing the Power button, third press SPIN button and last press Start/Pause button
Contact us for furthermore tips and maintenance of Daewoo washers
